Have you ever wondered how those corn kernels turn into popcorn? Like the name suggests, popcorn is simply corn kernels that have popped through heating and converted into popcorn.
When corn is cut off the cob, it is stored and preserved. Each kernel has a little water or moisture locked inside of them. So when you start to heat the popcorn the pressure builds up inside the corn to the point where it has no where to go. The contained moisture converts into steam which result in increase inner pressure. The pressure builds up and the starch starts to expand to the point where the kernel explodes. This explosion gives birth to the tasty treat we call popcorn.
Large, tender and tasty popcorn is in demand. How do we guarantee our corn kernel produces these tasty treats? This is the responsibility of the farmers.
Farmers that grow corn usually harvest their crop when the moisture content of the corn is approximately 16-20%. After harvesting the corn it must be dried so that it only contains 12-15% of water.
Not every corn can produce popcorn. Different conr means different moisture content. Little or no water content will result in no popcorn. It's important to realize that popcorn is formed through the expansion of water into gas which results in a build up of pressure. The pressure needs to be released which subsequently gives birth to the tasty popcorn.
The anatomy of the corn kernel is quite simple. The corn kernel contains 3 main parts which play a significant role in the production of popcorn. The pericarp, which is the hull or simply the outer covering, the germ which is the part that sprouts and the endosperm which contains the starch that expands.
So how does the popcorn withstand the build up of pressure? Pericarp is strong and acts as a cover of the corn kernel. This strong, protective layer acts like a seal, just like a sealed plastic bag would inflate when micro waved. The steam within this cover builds up to the point where it expands and eventually explodes. If the pericarp of the corn was damaged or cut the corn will not pop.
The expansion or popping of the corn takes place in the tightly packed endosperm. The greater development of the endosperm results in bigger and tastier popcorn. The shell of the corn explodes after the inner pressure exceeds about 9 athmospheres. The gelatinized starch granules found in the endosperm do not explode, but expand into the cooler room temperature and solidify into the thin, fluffy like bubbles that we call popcorn.
Different varieties of corn have been genetically engineered for the purpose of producing popcorn. The white and yellow hull-less are the most common. As soon as the kernel contains 10-15% of moisture it can be used to produce popcorn.
When corn is cut off the cob, it is stored and preserved. Each kernel has a little water or moisture locked inside of them. So when you start to heat the popcorn the pressure builds up inside the corn to the point where it has no where to go. The contained moisture converts into steam which result in increase inner pressure. The pressure builds up and the starch starts to expand to the point where the kernel explodes. This explosion gives birth to the tasty treat we call popcorn.
Large, tender and tasty popcorn is in demand. How do we guarantee our corn kernel produces these tasty treats? This is the responsibility of the farmers.
Farmers that grow corn usually harvest their crop when the moisture content of the corn is approximately 16-20%. After harvesting the corn it must be dried so that it only contains 12-15% of water.
Not every corn can produce popcorn. Different conr means different moisture content. Little or no water content will result in no popcorn. It's important to realize that popcorn is formed through the expansion of water into gas which results in a build up of pressure. The pressure needs to be released which subsequently gives birth to the tasty popcorn.
The anatomy of the corn kernel is quite simple. The corn kernel contains 3 main parts which play a significant role in the production of popcorn. The pericarp, which is the hull or simply the outer covering, the germ which is the part that sprouts and the endosperm which contains the starch that expands.
So how does the popcorn withstand the build up of pressure? Pericarp is strong and acts as a cover of the corn kernel. This strong, protective layer acts like a seal, just like a sealed plastic bag would inflate when micro waved. The steam within this cover builds up to the point where it expands and eventually explodes. If the pericarp of the corn was damaged or cut the corn will not pop.
The expansion or popping of the corn takes place in the tightly packed endosperm. The greater development of the endosperm results in bigger and tastier popcorn. The shell of the corn explodes after the inner pressure exceeds about 9 athmospheres. The gelatinized starch granules found in the endosperm do not explode, but expand into the cooler room temperature and solidify into the thin, fluffy like bubbles that we call popcorn.
Different varieties of corn have been genetically engineered for the purpose of producing popcorn. The white and yellow hull-less are the most common. As soon as the kernel contains 10-15% of moisture it can be used to produce popcorn.
No comments:
Post a Comment